svg Image Industrial Sandblast Kit w/ Nozzles - MTM Hydro
Industrial Sandblast Kit w/ Nozzles
mtm sandblast kit
sandblast nozzle kit

MTM Hydro Parts - Powered by Veloci Performance Products

Industrial Sandblast Kit w/ Nozzles

SKU# 17.0252

This complete Industrial Sand Blast Kit provides maximum cleaning power with dustless sandblasting capabilities. Similar to the MTM Foam Cannons, these Sandblast kits use the venturi effect to draw sand through a hose where it is expelled at high speed against the cleaning surface with pressurized water. Sandblast kits are impressive cleaning devices as long as your orifice is correct and your draw hose stays dry. 

*Note* this version of the sandblast kit comes with two threaded nozzles and a 1/4" Male plug for quick installation. Be sure to use the correct sized nozzle for your machine as this will greatly impact the performance of the Industrial Sandblast kit.

 

  • Industrial sandblast kit w/ head, probe, and hose
  • 1 - threaded 0° 4.0 nozzle
  • 1 - threaded 0° 5.0 nozzle
  • 1 - 1/4" plated steel Male plug to install at blast head inlet
  • 1 - roll of teflon tape for installation


  • Requires 3-8 GPM Pressure Washer
  • Requires 3,000-5,000 PSI Pressure Washer
  • Nozzle must be 0° Threaded nozzle fitting the specs of your machine

     

  • Use the right size nozzle!
  • Make sure your blast media is dry
  • Keep your draw line (hose) interior dry
  • Orient the sand barb (hose) to the top of the blast head so the sand drops into the chamber with the help of gravity, this will also limit the amount of water that could run down the hose if it was at the bottom.
  • Once you start cleaning limit the starting and stopping as this will create valleys of settled blast media in the draw hose and create an inconsistent flow of sand when you re-start.

  • WARNING

    This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects, or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

    The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

    Description

    This complete Industrial Sand Blast Kit provides maximum cleaning power with dustless sandblasting capabilities. Similar to the MTM Foam Cannons, these Sandblast kits use the venturi effect to draw sand through a hose where it is expelled at high speed against the cleaning surface with pressurized water. Sandblast kits are impressive cleaning devices as long as your orifice is correct and your draw hose stays dry. 

    *Note* this version of the sandblast kit comes with two threaded nozzles and a 1/4" Male plug for quick installation. Be sure to use the correct sized nozzle for your machine as this will greatly impact the performance of the Industrial Sandblast kit.

    Videos

     

    Included Items

    • Industrial sandblast kit w/ head, probe, and hose
    • 1 - threaded 0° 4.0 nozzle
    • 1 - threaded 0° 5.0 nozzle
    • 1 - 1/4" plated steel Male plug to install at blast head inlet
    • 1 - roll of teflon tape for installation


    Requires Specifications 

    • Requires 3-8 GPM Pressure Washer
    • Requires 3,000-5,000 PSI Pressure Washer
    • Nozzle must be 0° Threaded nozzle fitting the specs of your machine

       

    Tips:

  • Use the right size nozzle!
  • Make sure your blast media is dry
  • Keep your draw line (hose) interior dry
  • Orient the sand barb (hose) to the top of the blast head so the sand drops into the chamber with the help of gravity, this will also limit the amount of water that could run down the hose if it was at the bottom.
  • Once you start cleaning limit the starting and stopping as this will create valleys of settled blast media in the draw hose and create an inconsistent flow of sand when you re-start.

  • Manuals

    PROP 65

    WARNING

    This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects, or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

    The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

    // back order