svg Image Featherweight Foam Cannon - MTM Hydro
featherweight foam cannon foam cannon wash car wash
Featherweight Foam Cannon
Featherweight Foam Cannon
Featherweight Foam Cannon
Featherweight Foam Cannon

MTM Hydro Parts - Powered by Veloci Performance Products

Featherweight Foam Cannon

SKU# 14.5006

This Italian Designed Featherweight Foam Cannon is a great economical addition to a weekend warriors arsenal.  Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money.  Simply attach the foam cannon to your pressure washer using the included fitting, fill with your desired ratio of chemical and you are up and running.

  • Aluminum Foam Cannon body
  • 32 oz White Bottle
  • 1/4" x 9" tube for drawing chemical
  • 3.5 Orifice (1.25mm) installed in the Foamer Body
  • 1/4" QC Plated Steel Plug


NOTE: A specific 1/4"" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. 1/4"" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have certain models where the coupler will not receive a plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of a plug as well as the neck is, 1.5mm shorter than some couplers may allow.

  • Min. 1,100 psi - Max. 2,600 psi
  • Min. 1.4 gpm - Max. 2.4 gpm
  • Max. 140°F

     

    Note The full spectrum of ratings are not supported by the 3.5 orifice included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.

    Foam Cannon Replacement Items and Upgrades:

  • 3.0 Orifice (1.1mm) - Part #36.5000
  • 5.0 Orifice (1.5mm) - Part #36.0235
  • 6.5 Orifice (1.7mm) - Part #36.0236
  • Replacement 9" Suction Tube - Part #41.0338
  • Replacement Filter - Part #36.0226
  • Karcher Brass Bayonet and fitting - Part #s 24.0459 & 24.0127 *Purchase both*
  • Karcher Plastic Bayonet and fitting - Part #s 37.0259 & 24.0127*Purchase both*


To customize your foam cannon kit for a low pressure/volume power washer. First, determine if a change is needed - Click Here For Our Nozzle Size Calculator. Next, simply switch out the pre-installed orifice 1.25mm (3.5) orifice with the included orifice 1.1mm (3.0) orifice. 

Simply add 2-4 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! 

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

 

Description

This Italian Designed Featherweight Foam Cannon is a great economical addition to a weekend warriors arsenal.  Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money.  Simply attach the foam cannon to your pressure washer using the included fitting, fill with your desired ratio of chemical and you are up and running.

Included Items

  • Aluminum Foam Cannon body
  • 32 oz White Bottle
  • 1/4" x 9" tube for drawing chemical
  • 3.5 Orifice (1.25mm) installed in the Foamer Body
  • 1/4" QC Plated Steel Plug


NOTE: A specific 1/4"" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. 1/4"" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have certain models where the coupler will not receive a plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of a plug as well as the neck is, 1.5mm shorter than some couplers may allow.

Specifications

  • Min. 1,100 psi - Max. 2,600 psi
  • Min. 1.4 gpm - Max. 2.4 gpm
  • Max. 140°F

     

    Note The full spectrum of ratings are not supported by the 3.5 orifice included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.

    Foam Cannon Replacement Items and Upgrades:

  • 3.0 Orifice (1.1mm) - Part #36.5000
  • 5.0 Orifice (1.5mm) - Part #36.0235
  • 6.5 Orifice (1.7mm) - Part #36.0236
  • Replacement 9" Suction Tube - Part #41.0338
  • Replacement Filter - Part #36.0226
  • Karcher Brass Bayonet and fitting - Part #s 24.0459 & 24.0127 *Purchase both*
  • Karcher Plastic Bayonet and fitting - Part #s 37.0259 & 24.0127*Purchase both*


To customize your foam cannon kit for a low pressure/volume power washer. First, determine if a change is needed - Click Here For Our Nozzle Size Calculator. Next, simply switch out the pre-installed orifice 1.25mm (3.5) orifice with the included orifice 1.1mm (3.0) orifice. 

How-To Start Foaming

Simply add 2-4 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! 

PROP 65

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

 

// back order