Description

MTM Hydro's Italian Magnum28 Foam Cannon Kit has the newest Foam Cannon in the Industry paired with the newest Spray Gun and is now offered with 16 oz of PerFOAMance Hi-Foam car shampoo. The stylish and robust SGS28 Spray Gun with integrated Stainless Live Swivel is now paired with Stainless fittings and the PF22 Foam Cannon to give you a premium Italian Foam Kit that is unmatched by any other. Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running. The snub style Magnum28 Kit allows you to fit in tight spaces when cleaning and eliminates reaching 40" away to adjust your cannon settings.

Included Items

Italian Brass Foam Cannon body

Italian Calibrated 32 oz Grey PF22 Bottle

1/4" x 9" tube for drawing chemical

3.5 Orifice (1.25mm) installed in the Foamer Body

3.0 Orifice (1.1mm) included with kit

SGS 28 Spray Gun wth Integrated Stainless Live Swivel

1/4" Male Stainless Coupler - Gun Outlet

1/4" QC Stainless Steel Plug - Cannon Inlet

3/8" QC Stainless Steel Plug - Gun inlet -

3/8" M22 (14mm) Plug - Optional Gun inlet fitting

Teflon Tape for installation - 6 Wraps per fitting

Manual with care instructions and exploded view

NOTE - To install on certain models of pressure washers such as Greenworks, AR, Ryobi, or Sunjoe, two other fittings are required. See #24.5004 or #24.5022 to adapt to these models.

Specifications

Foam Cannon

Min. 1,100 psi - Max. 5,000 psi

Min. 1.4 gpm - Max. 5.3 gpm

Max. 140°F

Note: The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.

SGS 28 Spray Gun

Max - 3,000 PSI
Max - 4 GPM
Max - 320° F

Videos

Original Foam Cannon - Orifice Replacement

New Foam Cannon - Orifice Replacement

How-To Start Foaming

Simply add 2-4 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! The PF22.2 atomizes enough soap for two mid-sizes vehicles each bottle!

The PF22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc.

Manuals

PF22.2 User Manual

Magnum 28 Manual

PROP 65

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

Blaze 300 Front Support Bracket and Handle