PF22.2 Best Foam Cannon  MTM Hydro Standing Bottle PF22
PF22.2 Best Foam Cannon now with standing bottle in action
MTM Hydro PF22 Foam Cannon w/ standing bottle
MTM Hydro PF22 Foam Cannon w/ standing bottle
PF22.2 Best Foam Cannon  MTM Hydro Standing Bottle PF22
$89.99

MTM Hydro Parts

MTM Hydro PF22 Foam Cannon w/ standing bottle

SKU# 14.5013

The Best Foam Cannon on the market just got better! The All-New PF22 now features a standing one-liter bottle! Gone are the days of your top-heavy foam cannon. 

Perfect for:

  • Detailing: auto, RV, marine, and aviation
  • Agriculture applications
  • Concrete & brick cleaning
  • Home cleaning
  • Restaurant hood cleaning

 

 

This MTM Hydro PF22 Foam Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com

 Fun with Felicia & Foamers

How to replace a PF22 filter. 


 How to replace an orifice. 

 

  • Min. 1,100 psi - Max. 5,000 psi 
  • Min. 1.8 gpm - Max. 5.3 gpm 
  • Max. 140 F°
  • 1.25 mm /3.5 orifice Installed
  • 1.1 mm /3.0 orifice Included
  • 2 replacement filters included
  • NOTE Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.
  • NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. Once you install the correct plugin your new MTM Foam Cannon, you sill see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufacturers try to change their fittings!

Simply add 1-2 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! The PF22.2 atomizes enough soap for two mid-sizes vehicles each bottle! 

The PF-22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc. 

To customize your foam cannon kit for a low pressure/volume power washer. First, determine if a change is needed - Click Here For Our Nozzle Size Calculator. Next, simply switch out the pre-installed orifice 1.25mm (3.5) orifice with the included orifice 1.1mm (3.0) orifice. 

Related image WARNING PROP 65

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

Videos:

This MTM Hydro PF22 Foam Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com

 Fun with Felicia & Foamers

How to replace a PF22 filter. 


 How to replace an orifice. 

 

Specifications:

  • Min. 1,100 psi - Max. 5,000 psi 
  • Min. 1.8 gpm - Max. 5.3 gpm 
  • Max. 140 F°
  • 1.25 mm /3.5 orifice Installed
  • 1.1 mm /3.0 orifice Included
  • 2 replacement filters included
  • NOTE Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.
  • NOTE A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. Once you install the correct plugin your new MTM Foam Cannon, you sill see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufacturers try to change their fittings!

How-To

Simply add 1-2 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! The PF22.2 atomizes enough soap for two mid-sizes vehicles each bottle! 

The PF-22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc. 

To customize your foam cannon kit for a low pressure/volume power washer. First, determine if a change is needed - Click Here For Our Nozzle Size Calculator. Next, simply switch out the pre-installed orifice 1.25mm (3.5) orifice with the included orifice 1.1mm (3.0) orifice. 

Click here to view user's manual

PROP 65

Related image WARNING PROP 65

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.