Cleaning Starts Here.
MTM Hydro PF22 Foam Cannon, 2 extra filters, 1 1.1mm orifice included, 1 liter bottle, suction tube, spray pattern adjustment nozzle, chemical draw nozzle, and 2 fittings for easy conversion.
MTM Hydro PF22 Foam Cannon #14.5013
MTM Hydro PF22 Foam Cannon #14.5013
MTM Hydro PF22 Foam Cannon #14.5013
MTM Hydro PF22 Foam Cannon #14.5013
$92.00

$180.00

MTM Hydro Parts

MTM Hydro PF22 Foam Cannon #14.5013

Reduce long wash times. The MTM Foam Cannon will save time and money. Our PF22 atomizes enough foam soap for two mid-sizes vehicles each bottle!  Simply add 1-2 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming!

The PF-22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc. 

Perfect for

  • Detailing: auto, RV, marine, and aviation
  • Agriculture applications
  • Concrete & brick cleaning
  • Home cleaning
  • Restaurant hood cleaning

To modify your foamer kit into for a low pressure/volume) power washer simply  By switching out the pre-installed orifice 1.25mm (3.5) orifice with the included orifice 1.1mm (3.0) orifice. To determine if a change is needed. Click Here For Our Nozzle Size Calculator 

**NOTE** A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. Once you install the correct plugin your new MTM Foam Cannon, you sill see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufacturers try to change their fittings!

**NOTE** Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.

Click here to watch a video on replacing your foam cannon orifice.

 

Click here to watch a video on replacing your foam cannon filter.

Features

  • 1.25mm/3.5 orifice Installed
  • 1.1mm/3.0 orifice Included
  • Two stainless steel replacement filters Included 
  • Min. 1,100 psi - Max. 5,000 psi 
  • Min. 1.8 gpm - Max. 5.3 gpm 
  • Max. 140 F°

This MTM Hydro PF22 (Patented)  Foam Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com

 

 

Related image WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

Description

Reduce long wash times. The MTM Foam Cannon will save time and money. Our PF22 atomizes enough foam soap for two mid-sizes vehicles each bottle!  Simply add 1-2 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming!

The PF-22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc. 

Perfect for

  • Detailing: auto, RV, marine, and aviation
  • Agriculture applications
  • Concrete & brick cleaning
  • Home cleaning
  • Restaurant hood cleaning

To modify your foamer kit into for a low pressure/volume) power washer simply  By switching out the pre-installed orifice 1.25mm (3.5) orifice with the included orifice 1.1mm (3.0) orifice. To determine if a change is needed. Click Here For Our Nozzle Size Calculator 

**NOTE** A specific 1/4" Male plug may be required in order to attach the QC plug to the end of some residential pressure washer setups. MTM Hydro 1/4" plugs are standard for industrial use but many residential pressure washers such as Generac, Greenworks, Ryobi, AR Blue Clean, etc... have certain models where the coupler will not receive an MTM plug. Not all of these brands are impacted, just certain models. If you look closely, the Chamfer at the end of an MTM plug as well as the neck is, 1.5mm shorter than some couplers may allow. Once you install the correct plugin your new MTM Foam Cannon, you sill see that it was worth finding this specialized fitting as our foam cannons are second to none, even when manufacturers try to change their fittings!

**NOTE** Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.

Click here to watch a video on replacing your foam cannon orifice.

 

Click here to watch a video on replacing your foam cannon filter.

Features

  • 1.25mm/3.5 orifice Installed
  • 1.1mm/3.0 orifice Included
  • Two stainless steel replacement filters Included 

Specifications

  • Min. 1,100 psi - Max. 5,000 psi 
  • Min. 1.8 gpm - Max. 5.3 gpm 
  • Max. 140 F°

Manual

Video

This MTM Hydro PF22 (Patented)  Foam Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com

 

 

Related image WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.