Description

MTM Hydro's Italian-made Magnum28 foam cannon pressure washer attachment kit features the newest foam cannon and spray gun technology on the market. The stylish and robust SGS28 spray gun with integrated stainless live swivel is paired with stainless fittings and the PF22 foam cannon pressure washer attachment to give you a premium Italian Foam Kit that is unmatched by any other. Complete with the new stand up bottle, this kit is unrivaled. Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running. The snub style Magnum28 Kit allows you to fit in tight spaces when cleaning and eliminates reaching 40"" away to adjust your cannon settings.

The MTM Hydro PF22 launched in 2017 as the latest and greatest foam cannon to hit the world stage. The PF22 offers both, adjustable fan blades, and a two-stage nozzle allowing you to spray vertically and horizontally. By adjusting the fan blades (narrow or jet) MTM Hydro Foam cannons throw thick foam onto your vehicle, pole barn siding, house, fence, sidewalk, roof, or other washable items. The chemical injection knob on top of the PF22 also clicks and allows for precise measurement of more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam that is stickier than the Chinese knock off foam cannons. In doing so, this thick foam has a longer dwell time which allows the chemical to work on the cleaning surface for longer in its effort to emulsify the dirt and grime. some surfaces may still require some elbow grease, however, if the chemical does its job, very little (if any) scrubbing is required.

Included Items

Italian Brass Foam Cannon body

Italian Calibrated 32 oz wide mouth bottle and bottle adaptor

1/4" x 9" tube for drawing chemical

3.5 Orifice (1.25mm) installed in the Foamer Body

3.0 Orifice (1.1mm) included with the kit

2 Replacement filters

SGS 28 Spray Gun wth Integrated Stainless Live Swivel

1/4" Male Stainless Coupler - Gun Outlet

1/4" QC Stainless Steel Plug - Cannon Inlet

3/8" QC Stainless Steel Plug - Gun inlet

3/8" M22 (14mm) Plug - Optional Gun inlet fitting

Teflon Tape for installation - 6 Wraps per fitting

Manual with maintenance instructions and exploded view

NOTE: To install on certain models of pressure washers such as Greenworks, AR, Ryobi, or Sunjoe, two other fittings are required. See #24.5004 and #24.5022 to adapt to these models. *Note* This product is only meant to be used with the MTM Hydro Foam Cannon. Improper use or installation of a QC nozzle at the Spray Gun outlet is forbidden as this may result in serious harm or injury. For proper use, once you complete your foaming, install an extension lance at the gun inlet for wash down.

Specifications

Foam Cannon

Min. 1,100 PSI - Max. 5,000 PSI

Min. 1.4 GPM - Max. 5.3 GPM

Max. 140°F

Note: The full spectrum of ratings is not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- For example, 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of the bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.

SGS 28 Spray Gun

Max - 3,000 PSI
Max - 4 GPM
Max - 320° F

Videos

Original Foam Cannon - Orifice Replacement

New Foam Cannon - Orifice Replacement

How-To Start Foaming

Simply add 2-4 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! The PF22.2 atomizes enough soap for two mid-sizes vehicles each bottle!

The PF22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc.

Manuals

PF22.2 User Manual

Magnum 28 Manual

PROP 65

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

SS KEW STYLE INLET PLUG