svg Image HOSE WRAPPED 3/8 X 100 4,000 PSI, NO MARK GREY - MTM Hydro
HOSE WRAPPED 3/8 X 100 4,000 PSI, NO MARK GREY

HOSE WRAPPED 3/8 X 100 4,000 PSI, NO MARK GREY

SKU# 29.5214

MTM Hydro's KobraJet Non-Marking Grey Kobrajet Hose is available in various lengths to accommodate all cleaning scenarios. This true non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application. Kobrajet is manufactured out of high-quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes. These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 310°F but constant run temperatures should not exceed 275°F


  • 3/8" Male NPT Rigid End X 3/8" Male NPT Swivel End 
  • Strike max temp 310°F
  • Constant max temp 275°F
  • 100' in length 

 

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects, or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

Description

MTM Hydro's KobraJet Non-Marking Grey Kobrajet Hose is available in various lengths to accommodate all cleaning scenarios. This true non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application. Kobrajet is manufactured out of high-quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes. These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 310°F but constant run temperatures should not exceed 275°F


Specifications

  • 3/8" Male NPT Rigid End X 3/8" Male NPT Swivel End 
  • Strike max temp 310°F
  • Constant max temp 275°F
  • 100' in length 

 

PROP 65

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects, or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

// back order