svg Image Snub Nose Foam Cannon Kit - MTM Hydro
Snub Nose Foam Cannon Kit
Snub Nose Foam Cannon Kit
Snub Nose Foam Cannon Kit

MTM Hydro Parts

Snub Nose Foam Cannon Kit

SKU# 14.5011

This MTM Hydro Snub Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com

The Detailer's Snub Gun Foam Cannon Kit will now include a 1.1mm/3.0 orifice, along with the pre-installed 1.25mm/3.5 orifice. By switching out the pre-installed orifice (1.25mm/3.5 orifice) with the included orifice (1.1mm/3.0 orifice), it allows you to convert your kit into a low pressure/volume device if needed.  Click Here For Our Nozzle Size Calculator to determine which orifice is needed.

Click here to watch a video on replacing your foam cannon orifice.

We have also included two replacement stainless steel filters. This allows you to keep your Foam Cannon in top notch condition.

Click here to watch a video on replacing your foam cannon filter.

Cut through road grime and grease with the MTM Hydro Foam Cannon Snub Gun Kit. Featuring adjustable fan blades - it throws thick foam onto your vehicle, house, boat, sidewalk, roof, or restaurant hood.

The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. The internal agitator then creates the dense foam which maximizes dwell time on the surface that needs to be cleaned.

To install on certain models of pressure washer such as Greenworks, AR, Ryobi, or Sunjoe, two other fittings are required. See 24.0481 and 24.0448 to adapt to these machines.

**NOTE** Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

  • M407 spray gun 
  • Professional Foam Cannon with 1/4" plug, M22 screw coupler, tube, bottle, and 1.25mm/3.5 orifice installed 
  • 1.1mm/3.0 orifice Now Included
  • Two stainless steel replacement filters Now Included
  • Roll of teflon tape
  • Brass quick-connect coupler
  • Min. 1,100 psi - Max. 4,000 psi 
  • Min. 1.8 gpm - Max. 5.3 gpm 
  • Max. 140 F°

Description

This MTM Hydro Snub Kit, which includes filters and extra nozzle, is exclusive to MTMParts.com

The Detailer's Snub Gun Foam Cannon Kit will now include a 1.1mm/3.0 orifice, along with the pre-installed 1.25mm/3.5 orifice. By switching out the pre-installed orifice (1.25mm/3.5 orifice) with the included orifice (1.1mm/3.0 orifice), it allows you to convert your kit into a low pressure/volume device if needed.  Click Here For Our Nozzle Size Calculator to determine which orifice is needed.

Click here to watch a video on replacing your foam cannon orifice.

We have also included two replacement stainless steel filters. This allows you to keep your Foam Cannon in top notch condition.

Click here to watch a video on replacing your foam cannon filter.

Cut through road grime and grease with the MTM Hydro Foam Cannon Snub Gun Kit. Featuring adjustable fan blades - it throws thick foam onto your vehicle, house, boat, sidewalk, roof, or restaurant hood.

The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. The internal agitator then creates the dense foam which maximizes dwell time on the surface that needs to be cleaned.

To install on certain models of pressure washer such as Greenworks, AR, Ryobi, or Sunjoe, two other fittings are required. See 24.0481 and 24.0448 to adapt to these machines.

**NOTE** Foam Cannons do not operate on Pressure Washers that have Flow-Sensing unloaders. Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-sensing unloaders cannot accommodate.

PROP 65

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

Features

  • M407 spray gun 
  • Professional Foam Cannon with 1/4" plug, M22 screw coupler, tube, bottle, and 1.25mm/3.5 orifice installed 
  • 1.1mm/3.0 orifice Now Included
  • Two stainless steel replacement filters Now Included
  • Roll of teflon tape
  • Brass quick-connect coupler

Specifications

  • Min. 1,100 psi - Max. 4,000 psi 
  • Min. 1.8 gpm - Max. 5.3 gpm 
  • Max. 140 F°

Manual

Video

// back order