svg Image KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers - MTM Hydro
KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers
KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers
KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers
KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers

MTM Hydro Parts - Powered by Veloci Performance Products

KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers

SKU# 29.8230

KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers

KobraJet Non Marking Smooth Blue Hose is available in various lengths to accommodate all cleaning scenarios. This non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application.

Kobrajet is manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes.

These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 310F but constant run temperatures should not exceed 275F

For ease of setup, we have installed two stainless steel 3/8” couplers at the inlet and outlet of the hose.

 

Blue KobraJet Hose 

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

 

 

Description

KobraJet Smooth Blue 25’ 4,000 PSI w/ SS Couplers

KobraJet Non Marking Smooth Blue Hose is available in various lengths to accommodate all cleaning scenarios. This non-marking hose now features a thicker inner wall to prevent gashes and ruptures and is great for any pressure washing application.

Kobrajet is manufactured out of high quality components and assembled in the U.S using 'Bite the Wire' technology when installing the 3/8" rigid and swivel fittings. This technique guarantees that your hose ends will stay in place and will not rupture or blow off during pressure spikes.

These advanced fittings also have a longer life with superior resistance to corrosion due to the salt spray test which yielded results of 125 hours before corrosion was detected; nearly twice the industry standard, meaning your hose will last longer, especially in abusive environments.

Kobrajet hose can handle temp spikes up to 310F but constant run temperatures should not exceed 275F

For ease of setup, we have installed two stainless steel 3/8” couplers at the inlet and outlet of the hose.

 

Videos

Blue KobraJet Hose 

PROP 65

WARNING

This product can expose you to chemicals, including DINP and/or DEHP which is known to the state of California to cause cancer or birth defects or other reproductive harm, go to www.p65Warnings.ca.gov for more information.

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

 

 

// back order